A few months ago we released our very own Virtual MIDI Cable Driver for Microsoft Windows.
This download is licensed as freeware for the Windows (32-bit and 64-bit) operating system on a laptop or desktop PC from instrument software without restrictions. Virtual MIDI Piano Keyboard 0.7.2 is available to all software users as a free download for Windows 10 PCs but also without a hitch on Windows 7 and Windows 8. The free Windows touch MIDI keyboard. Use your Windows tablet to play any electronic MIDI instrument with your fingers. Connect IsoPad to your DAW and use one of three included keyboard layouts to play melodies, basslines, and hooks quickly. Best Free Midi Keyboard Software on Android. Yes, that's right, these days you don't even need a computer to use a MIDI device. You can now plug your MIDI keyboard directly into your phone or tablet and use that to create music. I bought this simple USB C to USB adapter for under $10 and it allows me to play my 49 key MIDI keyboard through.
Some users quickly reported that it was not recognized on the latest versions of Windows 10 (build 1607), because Microsoft now requires a different certification level than the one we had. We're now proud to announce that we did what was required from Microsoft to solve the problem, and that is now working very well on those systems too 🙂
So if you had downloaded the previous version and encountered this kind of error:
Be sure to checkout the latest release. Uninstall the previous version, and install this one instead.
But what does Springbeats Virtual MIDI Cable do exactly?
Glad you asked. It's a Windows driver which installs 8 new MIDI devices on your system. Each of this device can be used to carry MIDI data from one application to the other. Just like a cable would do if you were dealing with hardware instead of software.
A typical example would be to route MIDI notes from your MIDI controller, that were first transformed by an application, to your DAW. You'd then be able to record the transformed notes. This is how AutoTheory works for instance. It takes the notes from your USB MIDI keyboard, changes them, and lets you get these changes in another app, via our Virtual MIDI Cable.
The good thing is : it's totally free for personal uses! More than that, it is also opensource. The only restriction being you can't embed it with your own app if you're a developer, without our agreement.
Checkout the product page to read more and download.
Introduction
Virtual MIDI Piano Keyboard is a MIDI events generator and receiver. It doesn't produce any soundby itself, but can be used to drive a MIDI synthesizer (either hardware orsoftware, internal or external). You can use the computer's keyboard to playMIDI notes, and also the mouse. You can use the Virtual MIDI Piano Keyboardto display the played MIDI notes from another instrument or MIDI file player.To do so, connect the other MIDI port to the input port of VMPK.
Gymnopédie No. 1 by E. Satie (1866–1925) played by MuseScore and VMPK in Linux
VMPK has been tested in Linux, Windows and Mac OSX, but maybe you can build it also in other systems. If so, please drop a mail to the author.
The Virtual Keyboard by Takashi Iway (vkeybd) has been the inspiration for this one. It is a wonderful piece of software and has served us well for many years.Thanks!
VMPK uses a modern GUI framework: Qt5, that gives excellent features and performance. Drumstick RT provides MIDI input/output features. Both frameworks arefree and platform independent, available for Linux, Windows and Mac OSX.
The alphanumeric keyboard mapping can be configured from inside the programusing the GUI interface, and the settings are stored in XML files. Some mapsfor Spanish, German and French keyboard layouts are provided, translated fromthe ones provided by VKeybd.
VMPK can send program changes and controllers to a MIDI synth. The definitions for different standards and devices can be provided as .INS files, the same format used by QTractor and TSE3. It was developed by Cakewalk and used also in Sonar.
This software is still in development. See the TODO file for a list of pending features. Please feel free to contact the author to ask questions, report bugs, and propose new features. You can use the tracking system atSourceForgeproject site.
Copyright (C) 2008-2020, Pedro Lopez-Cabanillas and others.
Virtual MIDI Piano Keyboard is free software licensed under the terms of theGPL v3 license.
Getting started
MIDI concepts
MIDI is an industry standard to connect musical instruments. It is based on transmitting the actions performed by a musician playing some instrument to another different instrument. Musical instruments enabled with MIDI interfaces typically have two DIN sockets labeled MIDI IN and MIDI OUT. Sometimes there is a third socket labeled MIDI THRU. To connect a MIDI instrument to another one, you need a MIDI cable attached to the MIDI OUT socket of the sending instrument, and to the MIDI IN of the receiving one. You can find more information andtutorials like this one allaround the Net.
There are also hardware MIDI interfaces for computers, providing MIDI IN and OUT ports, where you can attach MIDI cables to communicate the computer with external MIDI instruments. Without needing hardware interfaces, the computer can also use MIDI software. An example is VMPK, which provides MIDI IN and OUT ports. You can attach virtual MIDI cables to the VMPK's ports, to connect the program to other programs or to the computer's physical MIDI interface ports. More details about this coming later.You usually want to connect the MIDI output from VMPK to the input of some synthesizer which transforms MIDI into sound. Another common destination for the connection would be a MIDI monitor that translates MIDI events into readable text. This will help you to understand what kind of information is transmitted using the MIDI protocol. In Linux you cantry KMidimon and in Windows MIDIOX.
VMPK doesn't produce any sound. You need a MIDI software synthesizer to hear the played notes.I recommend you to try QSynth,a graphical front-end to Fluidsynth. Icon slate 4 5 0 4. In Windows you can also use the 'Microsoft GS Wavetable Synth' that comes with all Windows versions, or a better alternative like CoolSoft Virtual MIDI Synth.Of course, an external MIDI hardware synth would be an even better approach.
Keyboard maps and instrument definitions
VMPK can help you to change sounds in your MIDI synthesizer, but only if you provide a definition for the synthesizer sounds first. The definitions are text files with the .INS extension, and the same format used by Qtractor (Linux), and Sonar (Windows).
When you start VMPK the first time, you should open the Preferences dialog and choose a definition file, and then select the instrument name among those provided by the definitions file. There should be one instrument definitions file installed in the VMPK's data directory (typically '/usr/share/vmpk' in Linux, and 'C:Program FilesVMPK' in Windows) named 'gmgsxg.ins', containing definitions for the General MIDI, Roland GS and Yamaha XG standards. It is a very simple format, and you can use any text editor to look, change, and create a new one. You can find a library of instruments definitions at the cakewalk ftp server.
Since the release 0.2.5 you can also import Sound Font files (in .SF2 or DLS formats) asinstruments definitions, using a dialog available at menu File->Import SoundFont.
Another customization that you may want to tweak is the keyboard mapping. The default layout maps about two and half octaves for the QWERTY alphanumeric keyboard, but there are some more definitions in the data directory, adapted for other international layouts. You can even define your own mapping using a dialog box available in the Edit->Keyboard map menu. There are also options to load and save the maps as XML files. The last loaded map will be remembered the next time you start VMPK. In fact, all your preferences, selected MIDI bank and program, and the controller values will be saved on exit, and restored when you restart VMPK the next time.
MIDI connections and virtual MIDI cables
In Windows, VMPK connects automatically to the default MIDI output, which is usually the 'Microsoft GS Wavetable Synth', included in all Windows versions. This MIDI synthesizer produces very poor quality sound, and suffers of high latency. A better (and free) alternative is CoolSoft Virtual MIDI Synth.
Live online channel free streaming directv. To connect hardware MIDI devices you need physical MIDI cables. To connect MIDI software you need virtual cables. In Windows you can use some virtual MIDI cable software, like MIDI Yoke, Maple, LoopBe1, orloopMIDI. New pdf reader for pc.
MIDI Yoke setup process will install the driver and a control panel applet to change the number of MIDI ports that will be available (you need to restart the computer after changing this setting). MIDI Yoke works sending every MIDI event written to an OUT port to the corresponding IN port. For instance, VMPK can connect the output to the port 1, and another program like QSynth can read the same events from the port 1.
Using MIDIOX you can add more routes between MIDI Yoke ports and other system MIDI ports. This program also provides other interesting functionalities, like a MIDI file player. You can listen the songs played in a MIDI Synth and at the same time see the played notes (only one channel at a time) in VMPK. To do so, you can use the 'Routes' window in MIDIOX to connect the input port 1 to the Windows Synth port. Also, configure the player's MIDI port to send to MIDI Yoke 1. And configure VMPK Input port to read from MIDI Yoke 1. Keep it 103. The player will send the events to the out port 1, which will be routed to both the input port 1 and at the same time to the synth port.
In Linux, you have ALSA sequencer to provide the virtual cables. The ports are dynamically created when you start a program, so there is not a fixed number of them like in MIDI Yoke.The command line utility 'aconnect' allows to connect and disconnect the virtual MIDI cables between any ports, being hardware interfaces or applications. A nice GUI utility for doing the same is QJackCtl. The main purpose of this program is to control the Jack daemon (start, stop and monitor the state). Jack provides virtual audio cables to connect your sound card ports and audio programs, in a similar way to the MIDI virtual cables, but for digital audio data.
QJackCtl connections in Linux
Frequently Asked Questions
How to display 88 keys?
Since VMPK 0.6.0 you can use the settings dialog to choose this exact number of keys.
There is no sound
VMPK doesn't produce any sound by itself. You need a MIDI synthesizer.
Some keys are silent
When you select channel 10 on a standard MIDI synth, it plays percussion sounds assigned to many keys but not to all of them. On melodic channels (not channel 10) you can select patches with a limited range of notes. This is known in music as Tessitura.
Patch names don't match the real sounds
You need to provide an .INS file describing exactly your synthesizer's sound set or soundfont. The included file (gmgsxg.ins) contains definitions for only standard GM, GS and XG instruments. If your MIDI synth doesn't match exactly any of them, you need to get another .INS file, or create it yourself.
Syntax of the Instrument Definition (.INS) files?
One explanation of the INS format is here.
Can I convert my Instrument Definition for vkeybd into an .INS file?
Sure. Use the AWK script 'txt2ins.awk'. You can even use the utility sftovkb from vkeybd to create an .INS file from any SF2 soundfont, but there is also a function to import the instrument names from SF2 and DLS files in VMPK.
You can find the AWK script 'txt2ins.awk' installed in the VMPK's data directory.
Download
You can find the latest sources, Windows, and Mac OSX packages at SourceForge project site.
- Windows 64bit: vmpk-0.8.0-win-x64-setup.exe (28 MB)
- Windows 32bit: vmpk-0.8.0-win-x86-setup.exe (25 MB)
- macOS X Intel 64bit: vmpk-0.8.0-mac-x64.dmg (11 MB)
- Linux (64 bit): vmpk-0.8.0-linux-x86_64.AppImage (26 MB)
- C++ Sources: vmpk-0.8.0.tar.bz2 (456 kB)
If you distribute VMPK packages for any distro, please drop me an email and I will add a link to your site here.
Installation from sources
Download the sources from https://sourceforge.net/projects/vmpk/files.Unpack the sources in your home directory, and change to the unpacked dir.
You can choose between CMake and Qmake to prepare the build system, but qmake isintended only for testing and development.
After that, compile the program:
If the program has been compiled sucessfully, you can install it:
Requirements
In order to successfully build and use VMPK, you need Qt 5.1 or newer. (install the -devel package for your system, or download the open source edition from qt.io Where can i download leopard 10 5 for free.
Drusmtick RT is required for all platforms. It uses ALSA sequencer in Linux, WinMM in Windows and CoreMIDI in Mac OSX, which are the native MIDI systems in each supported platform.
The build system is based on CMake.
You need also the GCC C++ compiler. MinGW is a Windows port.
Optionally, you can buid a Windows setup program using NSIS.
Notes for windows users
To compile the sources in Windows, you need to download either the .bz2 or .gz archive and uncompress it using any utility that supports the format, like 7-Zip.
To configure the sources, you need qmake (from Qt5) or CMake. You need to setthe PATH including the directories for Qt5 binaries, MinGW binaries, and alsoCMake binaries. The program CMakeSetup.exe is the graphic version of CMake forWindows.
For some hints on using the program in Windows, please see MIDI connections.
Notes for Mac OSX users
You can find a precompiled universal app bundle, including Qt5 runtime libraries, at the project download area. If you prefer to install from sources, CMake or Qmakecan be used to build the application bundle linked to the installed system libraries. You can use Qt5 either from qt.io or packages from Homebrew. Can you win real money on lotsa slots.
The build system is configured to create an universal binary (x86+ppc) into anapp bundle. You need the Apple development tools and frameworks, as wellas Qt5.
To compile VMPK using Makefiles, generated by qmake:
To compile using Makefiles, generated by CMake:
To create Xcode project files:
If you need something to produce noise, maybe you want to take a look to SimpleSynth, FluidSynth. ForMIDI routing, there is also MIDI Patchbay.
Notes for packagers and advanced users
You can ask the compiler for some optimisation when building the program.There are two ways: first, using a predefined build type.
The CMake 'Release' type uses the compiler flags: '-O3 -DNDEBUG'. Otherpredefined build types are 'Debug', 'RelWithDebInfo', and 'MinSizeRel'.The second way is to choose the compiler flags yourself.
You need to find the better CXXFLAGS for your own system.
If you want to install the program at some place other than the default(/usr/local) use the following CMake option:
Acknowledgements
Adobe premiere pro cc 2019 v13 1 2 for mac. In addition to the aforementioned tools, VMPK uses work from the followingopen source projects.
Virtual Midi Keyboard Download Free Computer
- from Qtractor, by Rui Nuno Capela
Instrument definition data classes - Icon and logo by Theresa Knott
- This page uses the Wordsworth 3 free template by Lee Baillie
- This page uses Lightbox2 by Lokesh Dhakar
Virtual Midi Piano Download
Thank you very much!
